Mowicoll®
Polyvinyl acetate emulsion adhesives suitable for wood bonding , laminating , woodworking , furniture assembly , panels, finger joints , edge and face gluing.
Adhesives, resins and binders are essential to tightly bond pieces of wood for furniture, laminate and other segments. A bonding provides not just ultimate strength but also acts as a filler for particle boards or MDF plates.
Adhesives
The following products meet the requirements of the European Standard EN 204 classifying wood adhesives into the durability classes D1 to D4.
D1 Classification
The products meet the D1 requirements where interior furniture is occasionally exposed to < 50°C for a short period and where the moisture content of wood is set to a max. of 15%.
- Universal gluing of woodworking artifacts
- Decorative laminates
- Furniture assembly
- Gluing through cold pressing process
D2 Classification
The products meet the D2 requirements where interior furniture is occasionally exposed to leakage or condensation of water and/or to occasional high humidity. The moisture content of wood does not exceed 18%.
- Universal gluing of woodworking artifacts
- Decorative laminates
- Furniture assembly
- Gluing through cold pressing process
D3 Classification
The products meet the D3 requirements where interior furniture is frequently exposed to dripping, condensation and/ or high humidity. Included is outdoor furniture not exposed to the weather.
- Finger joints artifacts
- Panels and frames
- Lamination of plastic veneers
- Gluing through high frequency, cold and hot pressing process
D4 Classification
The products are crosslinking modified homo-polymers meeting the D4 requirements. The furniture is exposed to frequently long term dripping or condensation water. It is exposed to the weather but with an adequate protection by a surface coating.
- Wooden artifacts gluing and porous materials in general
- Gluing through high frequency, cold and hot pressing process
- Mowilith® LDL 2517W must be used together with Catalyst P627
- Gluing through high frequency, cold and hot pressing process
Binder for wood mouldings coating
Benefits
- High compatibility with inorganic fillers
- Excellent glossy and smooth finish
Application area
- Frames
- Compatibility with inorganic fillers such as gypsum, titanium oxide and calcium carbonate
Adhesion promoter for wood mouldings coating
- Nanotechnology
- Eco-advanced formaldehyde-free product
- Increases water resistance on systems with plaster
- Product may be diluted for use
Benefits
- Providing highest water resistance for coating
Affiliations & memberships
Archroma are proud members and/or partners with the following organizations
